Progetti nei
sistemi di energia eolica |
| |
 |
High rotational speeds, small production
sizes, here particularly an optimal proportion of possible execution
and outer diameter and a large vibration stability are the characteristics
of cast slipring assemblies. Cast slipring assemblies are available
as carbon- or gold-spring wire version. High integration at
smaller production sizes distinguish the slipring assemblies
with gold-spring wire brushes. Typical applications are machine
tools, rope-production machines and wind energy systems. |
| |
| Cast slipring assemblies,
30 ways – gold-spring wire version |
| |
| Three of the contact
paths for signal transmission are designed for a serial connection
with interface RS485. The cables are laid onto plugs at the
slipring assembly. Corresponding terminals are intended for
this at the stator of the slipring assembly. The slipring assemblies
are designed for ambient temperatures of – 20 °C to
+ 50 °C as well as a rotational speed of 0 to 30 rpm. The
power- as well as the signal part have cast slip assemblies.
The transmission of the power part is realised by means of contact
carbons. The signal part is a gold-spring wire version. |
 |
| |
|
| Slipring assembly combinations
of carbon- and gold-spring wire version |
| |
| The cast slipring assembly
in gold-spring wire version is designed for ambient temperatures
of – 20 °C to + 50 °C. The service life of the
contact elements is around fifty million turns. |
 |
| |
| Technical specification |
| |
| Cast slipring assembly,
30 ways – gold-spring wire version |
2 ways 400 VDC, 50 A
3 ways 230 V, 10 A
2 ways 24 VDC, 7,5 A
24 ways 24 VDC, 1 A
|
| |
| Slipring assembly combinations
of carbon- and gold-spring wire version |
| |
5 ways 400 VAC, 80 A
4 ways 230 VAC, 16 A
6 ways 24 VAC, 16 A
15 ways 24 VAC, 1 A
|
